KESSEL Minilift S underfloor, with black cover, small lifting station for faecal-free waste water for installation in the base plate, pre-assembled for final assembly by the customer.
- with telescopic top section for stepless height and level adjustment and integrated floor drain - Base made of PP, resistant to aggressive sewage - Including backflow preventer for the pressure line - Including socket DN 50 for inlet and cable conduit - Pump with vortex impeller for maximum operational reliability, including float switch for level detection Plant type: single plant Color: Black Type of waste water: non-faecal waste water Installation situation: inside the building - Installation in the base plate Standard: EN 12050-2 Cover type: cover plate with grate Cover color: black Locking: yes Load class: K3 Length: 460mm Width: 380mm Installation depth T: 330mm - 460mm Inlet nominal width: DN50 Pressure outlet (DN): 32 Pressure outlet (Da): 40 Free ball passage: 10 mm Backflow preventer: integrated Usable volume: approx. 7.0 l Net weight: 7.5 kg Pump type: KTP300 Number of pumps: 1 Impeller type: Vortex impeller Pump control: float Flow rate: max. 8.0 m3/h Delivery height: max. 6 m Conveyed material temperature permanently (max.): 35 degreesC Rated Power (P2): 0.21KW Input power (P1): 0.34 KW Operating voltage: 230 V DS Rated Frequency: 50Hz Speed: 2800 rpm Rated Current: 1.6A Fusing: C 16 A Degree of protection (pump): IP 68 (3mWS) Operating mode: S1 Temperature monitoring: integrated Length of mains cable for pump: 5 m Pump connection cable type: H07RN-F 3G 1.0mm2 Connection type: Schuko 2-pin